Clay Paky Sharpy 330 Wash | Rental or to Own

Sharpy 330 Wash


  • New 330W Lamp (8,000 K 1,500 h)

  • Equalling the light output of a 1,000 Watt luminaire

  • Small, lightweight and easily transported: only 18.5 Kg (40.8 lbs)

  • Adjustable beam angle from 6.5° to 48°

  • Motorised Top Hat (Clay Paky patented)

  • CMY Color System + 11-color wheel + open

  • Rotating beam shaper

  • High speed movements and effects

  • Frosted, smooth mechanical dimmer

  • High speed Stop/Strobo effect

  • Soft-edge Filter + heavy frost filter

  • New, high-performance electronics

  • Art-Net / RDM

  • Patented Italian design Eco-friendly: replaces far larger and more expensive washlights

  • Electronic ballast fitted as standard

POWER SUPPLIES

115/230V 50/60 Hz

INPUT POWER

520VA at 230V 50Hz

LAMP SOURCE

Discharge lamp with a short arc burner in a reflector system

Output lamp power: 330W

Color temperature: 8,000 K

Nominal luminous flux: 16,000 lm

Average rated life: 1,500 h

OPTICS

Front-Fresnel lens (patented spiral lens)

Zoom: from 6.5° to 48°

EFFECTS SECTION

Smooth and frosted mechanical dimmer

High speed Stop/Strobo effect

Soft-edge Filter

Heavy Frost Filter

Rotating and indexable beam shaper

CONTROL AND PROGRAMMING

Max 22 DMX 512 control channels

Art-Net / RDM

Display: Graphic LCD backlit b/w Display

Pan/Tilt Resolution: 16 bit

Movement control: vectorial

DMX signal connection: 3 and 5 pole XLR input and output

Software upload through DMX input

BODY

Aluminium structure with die-cast plastic cover

Two side handles for transportation

Device locking PAN and TILT mechanisms for transportation and maintenance

MOVING BODY

Travel:PAN = 540°TILT = 240°

Resolution:PAN=2.11°; PAN FINE=0.008

TILT=0.98°; TILT FINE=0.0004°

Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit

ELECTRONICS

Long life self-charging buffer battery

Function reset controllable the lighting desk

ON/OFF lamp control from the lighting desk

“AUTOTEST” function from menu

Electronic monitoring with status error

DMX level monitoring on each channel

Automatic internal data transmission error diagnostics

Firmware upgrade even when the unit is not connected to the power supply

Firmware transfer from one light to another

SAFETY DEVICES

Bipolar circuit breaker with thermal protection

Automatic break in power supply in case of overheating

Forced ventilation

WORKING POSITION

Working in any position

Hanging system: with fast-lock omega clamps (1/4 turn) on the base

CE MARKING

In conformity with the European Directives:

• 2014/35/EU - Safety of electrical equipment supplied at low voltage (LVD)

• 2014/30/EU - Electromagnetic Compatibility (EMC)

• 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS)

• 2009/125/EC - EcoDesign requirements for Energy-related Products (ErP)

ETL

This product is available, on demand, with cETLus Listed Mark, that complies with the UL 1573, UL 8750 and CSA C22.2 No. 166 standards.

WEIGHT

18.5 kg (40.8 lbs)

Clay Paky A Leda B-Eye Was K-20 Zenith LIghting

Available as rental or to own from our

Orlando facility!

Enter your text here...